PORSCHE 996 TURBO S BRA
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
This comprehensive book is dedicated to the revolutionary Porsche 911s built between 1989 and 1994, known to aficionados and factory insiders as auftragsnummer 964 (project number 964). Porsche 911 enthusiast's companion™ covers Carrera 2, Carrera 4, and turbo models from 1989 to 1994. Whether you're a 964 owner, a prospective buyer, or a Porsche workshop technician looking for 964 information, this is an invaluable addition to your technical library.
General Fitment ACCESSORY 911 1989-94
Ksport procomp front big brake kit 16 in. Rotor 8 piston caliper Porsche 996 twin turbo 99-04
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperat...(choose a part on the right to read more)
General Fitment 911 1998-05
$4,873.50
Make a selection
This 254-page book is packed with information on how to choose, install, tune and maintain performance equipment including turbo, special built race and wish program cars. Porsche expert bruce anderson explains wheel and tire improvement, up-to-the-minute autocross or showroom stock suspension and brake modification, custom add-on body work and paint and interior improvements. Main sections cover history, engine, transmission, chassis and bodywork.
General Fitment ACCESSORY
Endless ewig n35s racing front brake pads Porsche 996 turbo 3.6l 01-05
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
N35s has a very good initial bite and represents a straighter line between initial bite and brake power. It is easy to control and a special characteristic is that the driver can initiate light braking with a slight touch of the pedal an...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 2005-08
Sport rear silencer for Porsche Cayenne 958 turbo with integrated exhaust flaps to be used with either oe flap control (if available) or with cargraphic's optional performance flap control system.
Cargraphic sport rear silencers are concipated as absorptive silencers which reduce exhaust back pressure drastically. The result is besides more power and torque a better response characteristic. Further evidence of improvements made, are recognised through an enhancedaccoustic and weight reduction.
Strenghtened brackets as well as the olive- and slide system ensure anexact adjustment, which guarantees a stressless installation.
Performance: 11kw(15ps) more power and 25nm additional torque.
...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10
$5,190.08
Make a selection
Sport rear silencer for Porsche Cayenne 958 turbo.
Cargraphic sport rear silencers are concipated as absorptive silencers which reduce exhaust back pressure drastically. The result is besides more power and torque a better response characteristic. Further evidence of improvements made, are recognised through an enhancedaccoustic and weight reduction.
Strenghtened brackets as well as the olive- and slide system ensure anexact adjustment, which guarantees a stressless installation.
Performance: 7kw (10ps) more power and 10nm additional torque.
Features:
1xabsorptive silencer
General Fitment CAYENNE 2007-10
$2,962.58
Make a selection
Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well.
Gruppem has poured an enormous amount of research data, testing, and air flow management experience into developing an aero component product line with absolutely no compromise. Every gruppem aerodynamic component is designed to match the make and model for each application, maximizing downforce, ...(choose a part on the right to read more)
General Fitment 911 1989-94
$1,081.65
Make a selection
Endless ewig me20 racing front brake pads Porsche 993 turbo 93-97
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
Me20 is a semi metallic compound, developed for racing and rallying. It is a step up in initial bite and is more straight forward with regards to brake power. Originally developed for btcc super touring cars where you have high traction affor...(choose a part on the right to read more)
General Fitment 911 1989-94
Endless ewig n35s racing front brake pads Porsche 993 turbo 93-97
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
N35s has a very good initial bite and represents a straighter line between initial bite and brake power. It is easy to control and a special characteristic is that the driver can initiate light braking with a slight touch of the pedal and the...(choose a part on the right to read more)
General Fitment 911 1989-94
Endless ewig me20 racing front brake pads Porsche 964 turbo 91-92
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
Me20 is a semi metallic compound, developed for racing and rallying. It is a step up in initial bite and is more straight forward with regards to brake power. Originally developed for btcc super touring cars where you have high traction affor...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1994-98
Endless ewig n35s racing front brake pads Porsche 964 turbo 91-92
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
N35s has a very good initial bite and represents a straighter line between initial bite and brake power. It is easy to control and a special characteristic is that the driver can initiate light braking with a slight touch of the pedal and the...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1994-98
Endless ewig concept a rear brake pads Porsche 964 turbo 91-92
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
Endless ewig brake pads were developed specifically for European cars; this compound has a very low dust emission and very low noise levels. The compound is a non asbestos one.
Technical data:
Temperature range: 0 - 450 degree c
General Fitment 911 1989-94
Endless ewig n35s racing rear brake pads Porsche 964 turbo 91-92
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
N35s has a very good initial bite and represents a straighter line between initial bite and brake power. It is easy to control and a special characteristic is that the driver can initiate light braking with a slight touch of the pedal and then...(choose a part on the right to read more)
General Fitment 911 1989-94
Endless ewig concept a front brake pads Porsche 996 turbo 3.6l 01-05
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
Endless ewig brake pads were developed specifically for European cars; this compound has a very low dust emission and very low noise levels. The compound is a non asbestos one.
Technical data:
Temperature range: 0 - 450 degree c
General Fitment 911 TURBO/GT2 2001-05 911 2005-08
Product details:
Direct upgrade/replacement for OEM ldz turbo resulting in significant power gains and quicker spool. Includes all gaskets and bracket needed for installation.
Features: turbocharger, gaskets, and bracket
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-peak power on a completely stock 1986 911 turbo is 251 hp and 280 ft/lbs of torque
-peak power on a k27/1 bar-equipped 1986 911 turbo improves to 315 hp and 358 ft/lbs of torque (with over 300 ft-lbs of torque available at 3800 rpm)
-turbo intake size: 2.75”
-turbo inlet size: 2.75”
-twin-scroll turbine housing for quicker response than a single exhaus...(choose a part on the right to read more)
General Fitment 930 1975-77
$2,481.50
Make a selection
Product details:
Direct replacement for restrictive factory headers; optimized for increased flow and quicker turbo spool
Features:
-fits all 911 turbo 930 vehicles (1976-1989)
-improves power delivery much sooner in the rpm range compared tot he restrictive OEM heat exchangers
-constructed from 14-16 gauge, c.n.c. Mandrel bent t304 stainless steel with high velocity 3-in-1 pyramidal investment cast merge collector for improved exhaust scavenging.
-this system will include a drip accumulator with double swivels and aeroquip lines with adapters and a graphite steel layered gasket for the drip accumulator.
-7/8” ...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$3,136.25
Make a selection
The worldest largest aftermarket Porsche tuner, techart, has this rear wing for the Porsche 996 turbo.
Type ii rear wing includes: engine cover, integrated brake light, and adjustable carbon gurney. Made from kevlar glass composite.
General Fitment 911 TURBO/GT2 2001-05
$5,386.50
Make a selection
FVD Brombacher997.1 tt ?700 series? Upgraded turbos
Facts:
- cnc re-profiled compressor housing and backing plate
- new, lightened and larger compressor wheel (12 blades)
- reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure.
- all new bearings.
- all new piston rings and seals.
- all parts cleaned, inspected and measured to motorsport specifications.
- all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol.
- 47.55 mm inducer
- 66 mm exducer
- flow rate = 37 lbs. / minute or 280g/s
- remanufactured by borg warner certified technicians
- shaft tolerances are strictly maintained to ensure durability
- free software update for tho...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,531.31
Make a selection
Combined with our proprietary software and exhaust (including sport cats) you can achieve 720 crank hp (720 ps) and 693 crank lb.-ft. (940 nm) of torque!
Turbo facts:
- increased velocity & reduced backpressure manifold (header) is included for plug and play installation.
- new, lightened and larger compressor wheels for up to 45% more power than OEM turbo power.
- housings are larger for higher flow and reduced backpressure.
- extremely high quality, German made turbos ensure years of trouble free operation.
- brand new turbos, not remanufactured.
- free software update included for those already running FVD software.
Our turbos are built for every day drivability and reliability that you expect ...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14
$12,575.38
Make a selection
This adapter is needed to mount the red rsr motorsport caliper with a 380-mm disc. Complete with 10.9 grade m12x30x1.5 mm mounting bolts. 964 c2 / 4 models also require the rs / rsr or turbo wheel carriers for these adapters to work and for the caliper & rotor to clear. Sold individually. 2 necessary per axle. Please note: aluminum corrodes in contact with salt and other environmental influences. For motorsport use only!
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1989-94
From $108.90
Make a selection
This kit convert's the 997 turbo GT2's / 997gt3 rs pccb rotors to 997 GT3 cup car steel rotors with green cup car pads. Only for 5-hole, not center lock . This system is complete with everything that you need to install. Do not ruin your expensive ceramic brake discs on the track. Get ready for racing with the original and much cheaper Porsche motorsport steel brake discs! What's in the box: 4 x 2-piece brake discs (380 x 34 mm - front / 350 x 28 mm - rear) 4 x wear sensors 8 x cup brake pads (racing green) 8 x screws for brake caliper 8 x damping plates technical tip: also order stainless steel brake lines (FVD b96 355 97) and racebrake fluid (012 145 ca).
This item may need to be sourced from Germany an...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09
From $6,081.90
Make a selection
Kit includes:
Ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,1:1
Max. Power - 217kw (295hp) @ 6250rpm
Max. Torque - 340nm (251lbf ft) @ 4400-6000rpm
Max. Speed - 275km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.4s
Tuning:
Max. Power - 227kw (308hp) @ 6500rpm
Max. Torque - 355nm (262lbf ft) @ 5000-5500rpm
Max. Speed - 278km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 5.2s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we h...(choose a part on the right to read more)
General Fitment CAYMAN 2006-08
$1,153.90
Make a selection
Genuine rear "big red" brake kit which includes 993 turbo calipers, discs, pads, damping plates, warning contacts and hex head mounting bolts. Please note: this kit requires you to reuse your original emergency brake and dust shield.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$3,681.37
Make a selection
Louvers slats they are such a unique feature, so important. By opening the front fenders, and allowing the hot air from the brakes to get ventilated out of the wheel arch! To mount on top or bottom of the exist front fender. For all Porsche 997 Carrera | s | 4s | GTS | GT3 | targa | turbo s | GT2 | GT2 rs | sport classic
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
The moshammer front bumper upper air vent is a combination of aggressive styling, aero-efficiency and increased cooling capacity. It is a motorsport finishing touch that complements the entire evo rs (991.2 turbo/s) / stormforce (991.1) / stormforce evo rs (991.2) or downforce rs (991.1 turbo/s) aero packages. FVD Brombacherhas a tradition of offering exclusive body styling that is functional, easily installed, wind tunnel tested, German made and TUV approved. Those high standards naturally led us to the moshammer brand. The moshammer aero styling brand has become a leader in the premium automotive segment. Each part is precision designed and manufactured in Germany for perfect fitment, superior durability and...(choose a part on the right to read more)
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|